Place the Seat 55 onto the Seat Support Use a Lock Knob 53 to secure the Seat Support at desired height. Page 12 A. Do not over tighten the Nuts. Insert the axle on the Right Butterfly 4 through the holes on the Front Press Base 3 from the bottom. Attach a Pulley 41 to the opening. Draw the Cable towards the right open Swivel Pulley Bracket Attach a Pulley 41 to the bracket.
IMPEX is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the use or performance of the product or other damages with respect to any economic loss, loss of property, loss of revenues or profits, loss of enjoyments or use, costs of removal, installation or other consequential damages or whatsoever natures.
Print page 1 Print document 21 pages. Rename the bookmark. Delete bookmark? For your safety and benefit, read this manual carefully before using the machine. As the distributor, we are committed to provide you complete customer satisfaction. However, certain precautions apply whenever you operate a piece of exercise equipment.
Be sure to read the entire manual before you assemble or use your Gym. In particular, note the following safety precautions: 1.
Please use your own ruler to measure the size. Insert two Guide Rods 17 into the holes on Rear Stabilizer Attach the Upper Frame 1 onto the two Guide Rods Place the Upper Frame onto the Vertical Frame 4. Attach the Seat Pad 88 to the Seat Post 6. Slide the Right Butterfly 10 onto the right axle on the Butterfly Base Insert the Butterfly Handle 9 into the pivot on the Right Butterfly.
Repeat Procedures A and B above to install the other side. Make sure the ball stopper is underneath the Frame. Running or aerobic shoes are also required when using the machine. Use the machine only for its intended use as described in this manual. Do not place any sharp object around the machine. Disabled person should not use the machine without a qualified person or.
Before using the machine to exercise, always do stretching exercises to properly warm up. Never operate the machine if the machine is not functioning properly. A spotter is recommended during exercise. Do not intend to insert weight selector pin while the weight stack or top plate is in elevated position. Be certain the weight Selector Pin is completely inserted. Never use dumbbells or other means to increase the weight resistance.
Use only weight plates provided by manufacturer. This machine is designed and intended for home and consumer use only, not for commercial use. Lubricate moving parts with WD or light oil periodically.
Inspect and tighten all parts before using the machine. The machine can be cleaned using a damp cloth and mild non-abrasive detergent. DO NOT use solvents. If the labels are missing or illegible, please call customer service at for replacements. Apply the labels in the location shown. NOTE: The following parts are not drawn to scale. Please use your own ruler to measure the size.
0コメント